Used CAT 301.5 Mini Excavator for Sale
Looking for a used CAT 301.5? This 1.5 ton class Caterpillar® mini excavator is built for work where a bigger machine cannot get in: landscaping, utility trenches, fence and footing holes, farm drainage and small building sites. Its 990 mm track width, rubber tracks and dozer blade let it move on finished ground, dig, and then backfill its own trench.
The product photos on this page show the actual supplied CAT 301.5, including the rubber-track undercarriage, dozer blade, toothed digging bucket, engine bay, Cat fuel/water separator and hydraulic control valve. A Cat China service sticker on the rear counterweight shows this machine was originally sold in the China market. Year, operating hours, serial number, engine and emission plates and the final equipment configuration are confirmed against the specific unit before shipment.
CAT 301.5 Specifications
| Model | Caterpillar 301.5 mini excavator | Weight class | 1.5 ton |
| Operating weight | 1,580 kg (rubber tracks, fixed undercarriage, canopy) up to 1,775 kg (steel tracks, expandable undercarriage) | Engine | Cat C1.1, 3 cylinders, 1.1 L, 77 mm bore × 81 mm stroke |
| Net power | 15.7 kW (21 hp) @ 2,400 rpm (ISO 9249) | Gross power | 16.1 kW (21.6 hp) (ISO 14396) |
| Max digging depth | 2,340 mm standard stick, 2,540 mm long stick | Max reach at ground level | 3,730 mm standard stick, 3,890 mm long stick |
| Max digging height | 3,430 mm | Max dump clearance | 2,450 mm |
| Vertical wall digging depth | 1,800 mm | Tail swing radius | 820 mm |
| Hydraulic system | Load sensing, variable displacement piston pump, 66 L/min @ 2,400 rpm | Operating pressure | 213 bar equipment and travel, 103 bar swing |
| Auxiliary flow | Primary 33 L/min, secondary 14 L/min, both @ 213 bar | Digging force | Bucket 14.1 kN, stick 8.2 kN (standard stick) |
| Boom swing | 50° right, 65° left | Swing speed | 9.8 rpm |
| Dozer blade | 990 mm wide, 225 mm high; lifts 275 mm, digs 260 mm below ground | Track | 230 mm rubber tracks (steel tracks optional) |
| Track width | 990 mm retracted, 1,300 mm expanded (expandable undercarriage) | Ground pressure | 27.3 to 30.6 kPa |
| Travel speed | 4.4 km/h high, 2.9 km/h low | Gradeability | 30° |
| Shipping dimensions | 3,620 × 990 × 2,310 mm (L × W × H, standard stick) | Operator station | Canopy, ROPS ISO 12117-2, TOPS ISO 12117 |
| Fuel tank | 22 L | Hydraulic tank / system | 18 L / 26 L |
Specification note: figures are Caterpillar published data for the current global 301.5 build. Machines sold into the China market can carry a different emission label and power rating, and weight changes with tracks, undercarriage and stick length. We verify the nameplate, engine plate, hour meter, serial plate and fitted options for the exact unit before loading.
Why Choose a Used CAT 301.5?
Small footprint, full-size digging depth for its class
With a 990 mm track width and an 820 mm tail swing, the 301.5 works between fences, along house walls and inside garden beds. It still reaches 2,340 mm below ground with the standard stick, which covers most water, drainage and cable trenches. If you are not sure whether 1.5 tons is enough for your jobs, our guide on what size excavator you need compares the weight classes by task.
Load-sensing hydraulics with auxiliary flow for attachments
The variable displacement piston pump delivers 66 L/min and only supplies the flow each function asks for, so boom, stick and swing stay smooth when used together. Caterpillar lists 33 L/min at 213 bar on the primary auxiliary circuit, which sets the limit for the breakers and augers this machine can run. Our mini excavator buying guide explains how to match attachments to machine flow and weight.
Cat service parts you can order by number
The photos show a Cat 156-1200 fuel/water separator and a hydraulic oil sight gauge on this machine. Filters and wear parts for the 301.5 are listed by Caterpillar part number, which makes ordering consumables through a Cat dealer or a parts supplier in your country simpler than for an unbranded mini excavator.
Common Applications
- Landscaping, garden construction and tree planting holes.
- Water pipe, drainage and cable trenches on residential and municipal jobs.
- Fence posts, footings and small foundation work, with the blade used for backfill and levelling.
- Farm, orchard and greenhouse ditching where ground damage must be kept low.
- Rental fleets that need a machine one operator can move on a small trailer.
CAT 301.5 vs XCMG XE17U
Buyers in the 1.5 to 2 ton class often compare the 301.5 with the used XCMG XE17U. The table uses Caterpillar figures for the 301.5 and the figures listed on our XE17U page.
| Item | CAT 301.5 | XCMG XE17U |
| Operating weight | 1,580 to 1,775 kg | 1,795 kg |
| Engine | Cat C1.1, 3 cylinders | Kubota D902-E4B |
| Rated power | 15.7 kW (21 hp) @ 2,400 rpm | 11.8 kW (15.8 hp) @ 2,300 rpm |
| Max digging depth | 2,340 mm | 2,250 mm |
| Max dump height | 2,450 mm | 2,430 mm |
| Bucket digging force | 14.1 kN | 16 kN |
| Travel speed | 4.4 / 2.9 km/h | 4.0 / 2.0 km/h |
| Transport dimensions | 3,620 × 990 × 2,310 mm | 3,780 × 980 × 2,240 mm |
The 301.5 has more engine power and faster travel, and digs slightly deeper. The XE17U is heavier and lists more bucket force. If your work needs a larger bucket and an enclosed cab, look at the 5 to 6 ton class, such as the Komatsu PC56 or the Hitachi ZX60.
Attachments and Hydraulic Compatibility
The machine is supplied with the toothed digging bucket shown in the photos. Before adding a breaker, auger, ditching bucket, thumb or quick coupler, send us the attachment model, required oil flow, working pressure and pin or coupler size. We will check the auxiliary lines fitted to this exact unit and confirm compatibility in writing. A breaker that needs more than the 33 L/min primary auxiliary flow or more operating weight than the machine has will run slowly or put extra load on the boom.
Inspection, Condition and Purchase Process
- Tell us your destination, application and preferred options.
- We send current photos, a walkaround video and a cold-start video of the engine.
- We verify the year, hour meter, serial number, engine and emission plates and the auxiliary hydraulic lines for the reserved unit.
- We check the rubber tracks, rollers and sprockets, boom and stick pins and bushings, swing bearing play, cylinder seals and the dozer blade.
- You can arrange an in-person inspection, live video walkaround or an independent inspection agency. After confirmation, we prepare the machine and provide loading photographs and export documents.
Because this is used construction equipment, cosmetic wear, paint history, track wear and bucket condition can vary. The inspection report for the specific unit is the reference for the final quotation. To judge the hour reading against visible wear, see how many hours is a lot for an excavator and undercarriage wear signs that reveal fake hours.
Shipping and Container Planning
| Container | Door height | 301.5 at 2,310 mm shipping height | Planning note |
| 20 ft standard (GP) | 2,292 mm | 18 mm too tall at the published 2,310 mm shipping height | Ask about an open top or flat rack, or ship in a 40 ft HQ |
| 40 ft high cube (HQ) | 2,597 mm | 287 mm of clearance | On paper 3 in a row and 2 side by side (6 machines) before lashing space |
Container door heights are carrier published figures. Six machines at 3,620 mm long and 990 mm wide take 10,860 mm of the 12,032 mm inside length and 1,980 mm of the 2,350 mm inside width of a 40 ft HQ, and about 10.7 tons of its payload. That is arithmetic on nominal dimensions, not a loading plan. The final quantity, lashing method, trade term and freight cost are confirmed by the forwarder for the selected units and destination port. A single 301.5 can also share a 40 ft HQ with a larger machine. See how we ship excavators in containers for more detail. We can provide commercial invoice, packing list, bill of lading and certificate of origin as required.
CAT 301.5 Buyer Questions
How much does a CAT 301.5 weigh?
Caterpillar lists 1,580 kg with rubber tracks, fixed undercarriage and canopy, and up to 1,775 kg with steel tracks and the expandable undercarriage. This unit runs on rubber tracks; we confirm whether its undercarriage is fixed or expandable before quotation.
Which engine is fitted?
The 301.5 uses the Cat C1.1, a 1.1 L three-cylinder diesel rated 15.7 kW (21 hp) net in the global build. The engine bay photo shows a three-cylinder injection pump. China-market units can carry a different emission rating, so we photograph the engine plate of the exact unit rather than assuming from the model name.
How deep can the CAT 301.5 dig?
Maximum digging depth is 2,340 mm with the standard 960 mm stick and 2,540 mm with the 1,160 mm long stick. Maximum dump clearance is 2,450 mm with the standard stick.
Can I import a China-market CAT 301.5 into my country?
That depends on your destination’s rules on emissions, machine age and inspection. Check used equipment import requirements by destination, and read our grey market excavator guide to understand dealer warranty and parts support for machines first sold in another market.
How are year, hours and serial number verified?
We photograph the hour meter, serial plate and engine plate of the reserved machine and include those details in the pre-shipment confirmation. Buyers may also arrange an independent inspection.
Related Used Excavators
Compare the XCMG XE17U for a similar 1.7 ton mini excavator, or step up to the Komatsu PC56, Hitachi ZX60 or Hitachi ZX70 for larger buckets and enclosed cabs. You can also browse our used Caterpillar excavator range or contact us for a quotation.
About HCQ Machinery
Anhui Huachunqiang Machinery Equipment Co., Ltd. is an independent used construction equipment supplier based in Hefei, China. We export used excavators, loaders, crushers, graders, bulldozers and rollers to buyers in South America, the Middle East, Southeast Asia, Africa and other markets. Tell us your application and destination so we can match the machine, attachments, inspection and shipping plan to your project.
Caterpillar®, CAT® and their logos are registered trademarks of Caterpillar Inc. Anhui Huachunqiang Machinery Equipment Co., Ltd. is an independent supplier of used construction equipment and is not affiliated with, authorised by, or endorsed by Caterpillar Inc.