Komatsu PC56 crawler excavator - side machine
Komatsu PC56 crawler excavator - opposite side
Komatsu PC56 crawler excavator - rear three quarter
Komatsu PC56 crawler excavator - rear counterweight
Komatsu PC56 crawler excavator - front blade tracks
Komatsu PC56 crawler excavator - bucket teeth linkage
Komatsu PC56 crawler excavator - cab seat
Komatsu PC56 crawler excavator - cab controls
Komatsu PC56 crawler excavator - side machine
Komatsu PC56 crawler excavator - opposite side
Komatsu PC56 crawler excavator - rear three quarter
Komatsu PC56 crawler excavator - rear counterweight
Komatsu PC56 crawler excavator - front blade tracks
Komatsu PC56 crawler excavator - bucket teeth linkage
Komatsu PC56 crawler excavator - cab seat
Komatsu PC56 crawler excavator - cab controls

Used Komatsu PC56 Excavator with Bucket and Blade

This used Komatsu PC56 crawler excavator is shown with a digging bucket, front blade and enclosed cab.

Listing photo reference HCQ-9640 (not a machine serial number)
Equipment shown Digging bucket, front blade and enclosed cab
Condition Used; mechanical condition requires inspection
Year / hours / serial Not verified in the supplied photo set
Price / availability Request current confirmation and a quotation

Request a quote for HCQ-9640. Published model figures and their source limitations are listed in the Description.

Share :

  • Description

  • Logistics & Stock

Enquire about the used Komatsu PC56 shown in this gallery using photo reference HCQ-9640. This identifies the listing, not the machine serial number. Request current availability and a quotation for the equipment pictured; year, hours and mechanical condition have not been verified from these photographs.

Komatsu PC56: Equipment and Photo Details

  • KOMATSU branding and PC56 markings are visible on the body. No PC56-7 or later-generation suffix is asserted from the file name alone.
  • The front blade and track shoes are photographed at close range. Ask for underside and roller views to complement these external views.
  • The bucket teeth, linkage, seat and controls are visible; photos do not establish pin clearance or hydraulic holding performance.

Planning the Purchase

When comparing this PC56 for trenching or small earthworks, provide the required digging depth, access width and ground conditions. Verify reach and transport size for the actual boom, arm, bucket and track configuration; a PC56 family name alone does not settle these questions.

Komatsu PC56 Published Reference Specifications

Reference edition: Komatsu PC56-7, 2008 technical report. These are published model figures, not verified measurements of the photographed used machine.

Reference item Komatsu PC56-7, 2008 technical report
Reference model PC56-7; suffix confirmation required
Machine mass 5,300 kg
Rated output 34.6 kW at 2,300 rpm
Reference engine S4D87E-1
Engine displacement 2.434 L
Standard bucket capacity 0.20 m³
Maximum digging depth / radius 3,800 / 6,120 mm
Fuel tank capacity 120 L

The photographs show PC56 markings but no readable serial plate confirming the -7 suffix. These values belong to the PC56-7 described by Komatsu, not every PC56 generation. Confirm the complete model and fitted equipment before using them for a purchase or transport plan.

Source: Komatsu Technical Report, Vol.54 No.161, pages 1 and 3. Checked 21 October 2026.

Inspection Requests for This Komatsu PC56

  • Inspect bucket teeth, side cutters, pins and bushes and ask for a controlled linkage-play demonstration.
  • Check track chains, rollers, idlers, sprockets and travel operation on both sides.
  • Request cold starting, blade movement, boom holding and swing/travel demonstrations, plus plate and hour-meter photos.

Komatsu PC56 Buyer Questions

Are these specifications for every PC56?

No. The table identifies Komatsu’s PC56-7 technical report. The photos establish PC56 markings but not a readable -7 identification plate. Use the figures only after matching the complete model.

What should I check on the bucket and front blade?

The gallery shows both components. Request close-ups of cutting edges, pins, bushes and blade cylinder rods, followed by a controlled demonstration of linkage play and blade operation. Their appearance does not establish remaining service life.

Request a Komatsu PC56 Quote

Send HCQ Machinery an enquiry quoting HCQ-9640, your destination port, intended work and required attachments. Ask for the machine identification and engine plates, a clear hour-meter photo, current operating video and an itemised list of included equipment.

Agree the inspection scope, price, payment terms and delivery timing for the selected unit. Freight planning requires actual dimensions and weight in the agreed loading configuration; brochure figures and photos cannot establish destination import eligibility.

Offered for enquiry by HCQ Machinery, an independent used-equipment supplier. Brand names identify the equipment and do not imply an authorised dealership. Browse the Komatsu Excavator range for other photo listings.

 
Full details

FAQ

  • 01

    What should I confirm before buying a used machine?

    Confirm the exact model and identification details, available photos or videos, included attachments and the condition information available for that machine. Good cosmetic appearance or a low displayed hour reading alone does not establish mechanical condition. Agree any further checks and the written equipment description before payment.

  • 02

    Can I request photos, videos or an inspection?

    Contact HCQ with the listing or model you are considering and ask which current photos, operating videos or inspection information are available. If you want an additional inspection, discuss its scope and arrangements before ordering. Do not assume that every machine listing includes an independent inspection report.

  • 03

    How is the delivery schedule confirmed?

    Delivery timing depends on machine availability, agreed preparation, payment confirmation, loading arrangements and the shipping route. Ask HCQ for an order-specific schedule. Dispatch from China and arrival at the destination are different dates; confirm both where applicable.

  • 04

    What is your payment term?

    Our standard payment terms and conditions are as follows: 1. 30% deposit by T/T to confirm the order 2. 70% balance by T/T before shipment