“More Than Competent in Mild Use Situations”: SDLG vs LiuGong Wheel Loaders, Used 956L vs 856H

Release time: 2026-11-06

On their makers’ own figures the SDLG LG956L and the LiuGong 856H are the same class: both are 5-ton loaders of about 17 to 18 tonnes with 162 kW engines and about 180 kN of breakout force. The practical differences are the gearbox (SDLG lists two forward gears for the LG956L, LiuGong four for the 856H), the engine fitted, and which brand has parts and dealers where you work.

This guide sets out what each maker publishes, what our photos of one SDLG LG956L and one LiuGong 856 show, and how to choose between them.

Which versions you will find on the used market

SDLG LG956L. SDLG described the LG956L as a mining and excavating loader with a long wheelbase and high breakout force, built for heavy loading in mines, aggregate plants and building sites, with an engine meeting China’s stage II emission standard (SDLG product page, archived October 2014). The LG956L is not in SDLG’s current global wheel loader list, where the 5-ton class is now covered by models such as the L956F and L956H (SDLG wheel loaders, checked 27 October 2026). Because SDLG described a China stage II engine, used LG956L machines were most likely built for the Chinese market.

LiuGong 856H. The 856H is in LiuGong’s current range, in three emission versions: Tier 2 with a Cummins 6LTAA9.3 engine, Tier 3 with a Cummins QSL9.3, and EU Stage V with a Cummins B6.7 (LiuGong 856H). Machines built for other markets may carry other engines, and LiuGong does not publish those versions on its global site, so a used 856H needs its engine plate checked rather than assumed.

Specifications from each maker

ItemSDLG LG956LLiuGong 856H (Tier 3)LiuGong 856H (Tier 2)
Operating weight17,000 to 17,250 kg18,100 kg17,900 kg
Rated load5,000 kg5,500 kg (LiuGong product page)5,500 kg (LiuGong product page)
Bucket2.5 to 4.5 m³3.5 m³ standard; 2.7 to 5.6 m³ range3.5 m³ standard; 2.7 to 5.6 m³ range
Rated power162 kW162 kW at 2,200 rpm162 kW at 2,200 rpm
EngineNot named; China stage II emissionCummins QSL9.3, 9.3 LCummins 6LTAA9.3, 9.3 L
TransmissionSDLG planetary powershift, 2 forward and 1 reverseElectro-hydraulic powershift, 4 forward and 3 reverseElectric proportional powershift, 4 forward and 3 reverse
Breakout force180 kN180.7 kN180.7 kN
Dump height3,180 to 3,700 mm (maximum dumping height)2,978 mm (dump clearance at full height)2,978 mm
Dump reach1,090 to 1,160 mm1,231 mm1,231 mm
Tipping load110 kN12,600 kg full turn (ISO 14397-1)12,600 kg full turn
Total hydraulic cycle11 s or less (“total time”; SDLG does not say which motions)9.4 s (raise, dump, float down)9.3 s
Length8,430 mm8,390 mm8,100 mm
SourceSDLG, archived 2014LiuGong sheet, 03/2024LiuGong sheet, 03/2024

LiuGong’s sheets for the 856H are titled “856H MAX”. SDLG’s “maximum dumping height” and LiuGong’s “dump clearance at full height discharge” are not necessarily measured the same way, and SDLG gives tipping load in kN while LiuGong gives kilograms on an ISO basis. Compare those rows with care.

What the differences mean on the job

Gears. SDLG lists two forward gears and one reverse for the LG956L; LiuGong lists four forward and three reverse for the 856H, with top speeds of 37 km/h (Tier 2) and 38.6 km/h (Tier 3). For short V-pattern loading at a stockpile, two forward gears may be all you use. If the loader travels between stockpiles or along a haul road, the extra gears matter more.

Built for rock or for general work. SDLG fitted the LG956L as standard with a rock bucket with welded teeth, wear plates between the teeth and 20-ply mining tyres. LiuGong offers rock buckets of 2.5 to 3.0 m³ for the 856H but quotes a 3.5 m³ standard bucket. The machine in front of you may have a different bucket from either standard, so check what is fitted.

Cycle time. LiuGong’s total cycle of 9.3 to 9.4 seconds is faster than SDLG’s total time of 11 seconds or less, though SDLG does not say which motions it counts. Over a long shift of truck loading that adds up, but on a used machine a worn pump or relief valve can change both figures.

Engines, gearboxes and parts

A buyer on r/Construction (March 2024) described LiuGong loaders as having ZF transmissions and Cummins engines. LiuGong’s sheets do not say which gearbox is fitted, so it can differ from machine to machine. In the same thread, a company running LiuGong loaders in the United States wrote that its units have a Cummins engine and drivetrain. LiuGong’s spec sheets name Cummins engines for the 856H but describe the transmission only as a powershift, without naming the maker.

What our photos show:

  • An SDLG LG956L in our photos has a green in-line six-cylinder engine with a Weichai-branded oil filter. SDLG’s page did not name the engine maker.
  • Photos we have of a LiuGong 856 show the ZF logo cast into the gearbox housing and a Fleetguard filter on the engine. A filter brand does not identify the engine, so ask for the engine plate photo.

For parts this matters more than the loader brand. LiuGong says it has more than 500 dealers in more than 180 countries and regions, with over 30 regional parts centers (LiuGong). SDLG says its business reaches more than 130 countries and regions (SDLG). Weichai, Cummins and ZF also run their own service networks. Ask the nearest dealer of each brand whether they support the exact engine and gearbox on the plates before you decide.

What users report

There is little published owner data for either model. Two of the comments we found are about LiuGong and one is about Chinese loaders in general:

  • A commenter on r/Skidsteer (July 2025) said Chinese wheel loaders are proving more than competent in mild use such as farm and land work, and mentioned a garden supply store that has run the same one since 2021.
  • A company running LiuGong loaders in the United States said in April 2025 that they had been good machines, with one complaint about the Cummins DEF system.
  • A commenter on r/mining (November 2021) said LiuGong machines (the thread was about LiuGong) had not lasted in chrome mines and that buyers should expect more downtime.

None of these is a test, and none compares SDLG with LiuGong directly. They suggest Chinese 5-ton loaders are a reasonable choice for general loading, with more caution for heavy mining.

The two machines in our photos

Used SDLG LG956L wheel loader with the LG956L model name on the counterweight
SDLG LG956L in our photos; the model name is on the counterweight.

The photos show what each machine is, not its condition inside. Before you agree a price on any used 5-ton loader, ask the seller, us included, for the serial plate, the engine plate, the hour meter photographed with the engine running, and a cold start and gear-change video. Our used wheel loader buying guide explains what to look for in those videos.

How to choose between them

Your situationLean towardsWhy (our reading)
LiuGong has a dealer near you and SDLG does notLiuGong 856HParts and service support matter more than small spec differences
SDLG has a dealer near you and LiuGong does notSDLG LG956LSame reason
Rock loading, short V-patternLG956L with rock bucketBuilt and equipped for it as standard
Long hauls between stockpiles856HFour forward gears and 37 to 38.6 km/h
Your engine dealer is Weichai or CumminsWhichever machine carries that engineYou can source engine parts through that network

If you are also weighing a used Cat, our comparison of a Chinese wheel loader against a used Caterpillar covers that choice. Our listings include a used SDLG 5-ton loader; see all of them on our used loaders page.

Frequently asked questions

Is SDLG or LiuGong better?
On their own published figures the LG956L and 856H are close: the same 162 kW rating and about 180 kN of breakout force. The better choice is usually the brand with a dealer and parts near you.

What engine does the SDLG LG956L have?
SDLG’s product page did not name it. The LG956L in our photos has a Weichai-branded filter on its engine; check the engine plate on any machine you buy.

Does the LiuGong 856H have a ZF transmission?
LiuGong’s spec sheets describe a powershift transmission without naming the maker. The 856 in our photos has a ZF logo cast into the gearbox housing. Check the gearbox plate on the machine you are buying.

How heavy is an SDLG LG956L?
SDLG listed it at 17,000 to 17,250 kg, with a rated load of 5,000 kg.

Last reviewed 4 November 2026 · Prepared by HCQ Machinery’s export team. This article was drafted with AI assistance. LiuGong figures were checked against LiuGong’s 856H sheets dated 03/2024 (rechecked 4 November 2026); SDLG figures come from SDLG’s LG956L page as archived on 19 October 2014, because SDLG no longer lists the model. Forum comments are paraphrased from the linked threads. Photos show an SDLG LG956L and a LiuGong 856 we have photos of.

Go Back

Recommended articles