| Model | BM80 |
| Type | Walk-behind double drum roller |
| Operating Mass | 820 kg |
| Drum Width | 680 mm |
| Engine | Honda GX390 petrol, 9.7 kW (diesel: BM80C, BM80S) |
| Vibration | 65 Hz, 20 kN, front and rear |
| Speed | 0 to 3.5 km/h |
BM80 Walk-Behind Double Drum Roller, 820 kg
Description
Logistics & Stock
The BM80 is the larger walk-behind double drum roller in this range: 820 kg with 680 mm drums, front and rear vibration at 65 Hz, and hydraulic steering. The table lists the petrol BM80 with a Honda GX390 engine and the diesel BM80C (186F) and BM80S (RD90N-1). For a lighter machine see the BM50.
Technical Parameters Unit BM80 Model BM80 BM80C BM80S Weight Operating Mass kg 820 830 850 Static Load N/cm 58/63 59/64 61.5/65.5 Dimensions Working Width mm 730 Overall Length (Guard Frame Tilted/Upright) mm 2500/1800 Overall Height (Guard Frame Tilted/Upright) mm 1140/1710 Outer Turning Radius mm n/a Steel Wheel Width mm 680 Steel Wheel Diameter mm 355 Wheelbase mm 650 Drive Engine Brand HONDA Changfa Changchai Fuzhou Jinfeiyu Engine Model GX390 186F RD90N – 1 Engine Type Gasoline, Four – stroke Diesel, Four – stroke Diesel, Horizontal Water – cooled Number of Cylinders pc 1 1 1 Output Power kW 9.7 6 5.88 Rotation Speed rpm 3600 3600 2400 Electrical Equipment V 12 Drive Mode Variable Piston Pump, Stepless Speed Change, Dual – wheel Travel Characteristics Speed km/h 0 – 3.5 Theoretical Climbing Ability % 30 Braking Service Brake Variable Piston Pump Steering Steering Mode Hydraulic Steering Steering System Hydraulic Support Disk Excitation System Vibrating Steel Wheel Front + Rear Drive Form Mechanical Transmission Vibration Frequency Hz 65 60 Vibration Amplitude mm 0.5 Exciting Force kN 20 Water Spraying System Form Gravity Type Water Spraying Capacity Hydraulic Oil Capacity L 28 Fuel Capacity L 6.5 5.5 10 Water Tank Capacity L 30 



Not sure which roller type fits your job? Our guide to single drum and double drum rollers explains which roller suits which layer and when the vibration should be off. The rest of our compaction range is on the road roller page.
Full details
FAQ
-
01
What should I confirm before buying a used machine?
Confirm the exact model and identification details, available photos or videos, included attachments and the condition information available for that machine. Good cosmetic appearance or a low displayed hour reading alone does not establish mechanical condition. Agree any further checks and the written equipment description before payment.
-
02
Can I request photos, videos or an inspection?
Contact HCQ with the listing or model you are considering and ask which current photos, operating videos or inspection information are available. If you want an additional inspection, discuss its scope and arrangements before ordering. Do not assume that every machine listing includes an independent inspection report.
-
03
How is the delivery schedule confirmed?
Delivery timing depends on machine availability, agreed preparation, payment confirmation, loading arrangements and the shipping route. Ask HCQ for an order-specific schedule. Dispatch from China and arrival at the destination are different dates; confirm both where applicable.
-
04
What is your payment term?
Our standard payment terms and conditions are as follows: 1. 30% deposit by T/T to confirm the order 2. 70% balance by T/T before shipment



