| Brand | Dynapac |
| Model | CC622 |
| Type | Double drum vibratory roller |
| Operating Mass with ROPS | 12,550 kg |
| Vibration Frequency | 49 Hz |
| Centrifugal Force | 127/65 kN |
| Location | Hefei, Anhui, China |
Used Dynapac CC622 Double Drum Roller, 12.5 Ton
US$15,312/ USD
Description
Logistics & Stock
This Dynapac CC622 is a double drum (tandem) vibratory roller for asphalt, with the CC622 decal on the frame and a canopy over the operator’s platform. Dynapac’s CC 622 maintenance manual gives an operating mass of 12,550 kg with ROPS and a vibration frequency of 49 Hz.
Specifications
Brand Dynapac Model CC622 Type Double drum vibratory roller Operating Mass with ROPS 12,550 kg Static Linear Load, Front/Rear 28.5/28.2 kg/cm Vibration Frequency 49 Hz Amplitude, High/Low 0.61/0.31 mm Centrifugal Force, High/Low 127/65 kN Travel Speed 0 to 11 km/h Location Hefei, Anhui, China Figures are from Dynapac’s CC 622 maintenance manual (M622EN3), technical specifications page. Ask us for this unit’s engine plate and hour meter photos. Our guide to single drum and double drum rollers explains where a 12 ton tandem sits in an asphalt rolling sequence.
Photos









Full details
FAQ
-
01
What should I confirm before buying a used machine?
Confirm the exact model and identification details, available photos or videos, included attachments and the condition information available for that machine. Good cosmetic appearance or a low displayed hour reading alone does not establish mechanical condition. Agree any further checks and the written equipment description before payment.
-
02
Can I request photos, videos or an inspection?
Contact HCQ with the listing or model you are considering and ask which current photos, operating videos or inspection information are available. If you want an additional inspection, discuss its scope and arrangements before ordering. Do not assume that every machine listing includes an independent inspection report.
-
03
How is the delivery schedule confirmed?
Delivery timing depends on machine availability, agreed preparation, payment confirmation, loading arrangements and the shipping route. Ask HCQ for an order-specific schedule. Dispatch from China and arrival at the destination are different dates; confirm both where applicable.
-
04
What is your payment term?
Our standard payment terms and conditions are as follows: 1. 30% deposit by T/T to confirm the order 2. 70% balance by T/T before shipment
