Used BOMAG BW120AD-4 tandem roller, side view
BOMAG BW120AD-4 light tandem roller, side view with both drums
BOMAG BW120AD-4, front view of the steel drum
BOMAG BW120AD-4 tandem roller, right side view
BOMAG BW120AD-4 tandem roller, left side view
BOMAG steering wheel and control console of the BW120AD-4
Kubota diesel engine in the BOMAG BW120AD-4
Used BOMAG BW120AD-4 tandem roller, side view
BOMAG BW120AD-4 light tandem roller, side view with both drums
BOMAG BW120AD-4, front view of the steel drum
BOMAG BW120AD-4 tandem roller, right side view
BOMAG BW120AD-4 tandem roller, left side view
BOMAG steering wheel and control console of the BW120AD-4
Kubota diesel engine in the BOMAG BW120AD-4

Used BOMAG BW120AD-4 Tandem Roller, 2.6 Ton

BrandBOMAG
ModelBW120AD-4
TypeLight tandem roller
Operating Weight with ROPS2,600 kg
Working Width1,200 mm
EngineKubota D 1703, 24.7 kW
Vibration Frequency70/55 Hz
LocationHefei, Anhui, China

Share :

  • Description

  • Logistics & Stock

This BOMAG BW120AD-4 is a light tandem roller with two vibrating steel drums 1,200 mm wide. The photos show it from both sides and the front, the BOMAG steering console and the Kubota diesel engine. A tandem of this size suits asphalt patching, paths, driveways and car parks.

Specifications

Brand BOMAG Model BW120AD-4
Operating Weight with ROPS 2,600 kg Working Width 1,200 mm
Average Static Linear Load 10.8 kg/cm Engine Kubota D 1703-M-E3B, 3 cylinders, water cooled
Engine Power 24.7 kW at 2,600 rpm Vibration Frequency 70/55 Hz
Amplitude 0.51 mm Centrifugal Force 45/28 kN
Speed, Working/Travel 0 to 6.5 / 0 to 12 km/h Gradeability, without/with Vibration 40/30%
Fuel Tank 40 l Water Tank 220 l

Figures are from BOMAG’s specification sheet for the BW 100 AD-4, BW 120 AD-4 and BW 125 AD-4 tandem rollers. Engine versions changed over the model years, so ask us for this unit’s engine plate and hour meter photos. Our guide to single drum and double drum rollers explains where a light tandem fits and when its vibration should be off.

Photos

 
Full details

FAQ

  • 01

    What should I confirm before buying a used machine?

    Confirm the exact model and identification details, available photos or videos, included attachments and the condition information available for that machine. Good cosmetic appearance or a low displayed hour reading alone does not establish mechanical condition. Agree any further checks and the written equipment description before payment.

  • 02

    Can I request photos, videos or an inspection?

    Contact HCQ with the listing or model you are considering and ask which current photos, operating videos or inspection information are available. If you want an additional inspection, discuss its scope and arrangements before ordering. Do not assume that every machine listing includes an independent inspection report.

  • 03

    How is the delivery schedule confirmed?

    Delivery timing depends on machine availability, agreed preparation, payment confirmation, loading arrangements and the shipping route. Ask HCQ for an order-specific schedule. Dispatch from China and arrival at the destination are different dates; confirm both where applicable.

  • 04

    What is your payment term?

    Our standard payment terms and conditions are as follows: 1. 30% deposit by T/T to confirm the order 2. 70% balance by T/T before shipment