XCMG GR2153 motor grader - side moldboard
XCMG GR2153 motor grader - rear three quarter
XCMG GR2153 motor grader - opposite rear side
XCMG GR2153 motor grader - front tyre blade
XCMG GR2153 motor grader - engine compartment
XCMG GR2153 motor grader - cab controls
XCMG GR2153 motor grader - side moldboard
XCMG GR2153 motor grader - rear three quarter
XCMG GR2153 motor grader - opposite rear side
XCMG GR2153 motor grader - front tyre blade
XCMG GR2153 motor grader - engine compartment
XCMG GR2153 motor grader - cab controls

Used XCMG GR2153 Motor Grader

This used XCMG GR2153 motor grader is shown with its moldboard, wheeled chassis and enclosed operator cab. The photo set includes exterior angles, a front tyre and blade-area view, the engine compartment and cab controls. The visible marking is GR2153; no other grader model is substituted.

Listing photo reference HCQ-9658 (not a machine serial number)
Equipment shown Moldboard, wheeled chassis and enclosed cab
Condition Used; mechanical condition requires inspection
Year / hours / serial Not verified in the supplied photo set
Price / availability Request current confirmation and a quotation

Request a quote for HCQ-9658. Published model figures and their source limitations are listed in the Description.

Share :

  • Description

  • Logistics & Stock

Enquire about the used XCMG GR2153 shown in this gallery using photo reference HCQ-9658. This identifies the listing, not the machine serial number. Request current availability and a quotation for the equipment pictured; year, hours and mechanical condition have not been verified from these photographs.

XCMG GR2153: Equipment and Photo Details

  • GR2153 identification decals are visible on the body panels.
  • The side view shows the moldboard and grading linkage, while the rear angles show the tandem wheel arrangement and rear mounting structure.
  • The open engine area and operator controls are photographed, but engine output, grader mass and blade dimensions have not been measured.

Planning the Purchase

For road maintenance or site levelling, specify the required blade width, surface and working conditions. Ask for mouldboard edge measurements, circle and drawbar play, articulation operation and tandem checks. Blade width is not published here because the available references conflict.

XCMG GR2153 Published Reference Specifications

Reference edition: XCMG GR2153, XCMG E-commerce listing. These are published model figures, not verified measurements of the photographed used machine.

Reference item XCMG GR2153, XCMG E-commerce listing
Reference engine QSB6.7
Rated power / speed 164 kW at 2,000 rpm
Standard total weight 16,500 kg
Standard overall dimensions, L × W × H 8,970 × 2,625 × 3,420 mm
Tyre specification 17.5-25
Forward / reverse maximum listed speed 38 / 23 km/h
Fuel tank capacity 280 L

The source identifies GR2153. XCMG’s GR2153IV is a separate published version and its figures are not substituted here. Verify the engine plate, fitted moldboard, rear equipment and actual transport dimensions; attachments can change the standard dimensions and weight.

Source: XCMG E-commerce Inc. GR2153 specifications on Machmall. Checked 21 October 2026.

Inspection Requests for This XCMG GR2153

  • Demonstrate moldboard lift, angle and side-shift functions and inspect the circle, cutting edges and associated wear points.
  • Check articulation, steering, tandem drive, tyres and brakes in an operating test.
  • Request the engine/transmission identification, hour-meter evidence and details of the rear equipment included with the machine.

XCMG GR2153 Buyer Questions

Is GR2153 the same as GR2153IV?

No model substitution is made here. The body marking reads GR2153 and the reference table is for GR2153. Do not apply a GR2153IV engine or emissions specification without the machine plate.

Can the brochure dimensions be used to book freight?

Only as an initial model reference. Measure this grader with its blade position, tyres and any rear equipment in the agreed loading configuration. Confirm the actual shipping weight and loading method before booking.

Request a XCMG GR2153 Quote

Send HCQ Machinery an enquiry quoting HCQ-9658, your destination port, intended work and required attachments. Ask for the machine identification and engine plates, a clear hour-meter photo, current operating video and an itemised list of included equipment.

Agree the inspection scope, price, payment terms and delivery timing for the selected unit. Freight planning requires actual dimensions and weight in the agreed loading configuration; brochure figures and photos cannot establish destination import eligibility.

Offered for enquiry by HCQ Machinery, an independent used-equipment supplier. Brand names identify the equipment and do not imply an authorised dealership. Browse the Used Motor Grader range for other photo listings.

 
Full details

FAQ

  • 01

    What should I confirm before buying a used machine?

    Confirm the exact model and identification details, available photos or videos, included attachments and the condition information available for that machine. Good cosmetic appearance or a low displayed hour reading alone does not establish mechanical condition. Agree any further checks and the written equipment description before payment.

  • 02

    Can I request photos, videos or an inspection?

    Contact HCQ with the listing or model you are considering and ask which current photos, operating videos or inspection information are available. If you want an additional inspection, discuss its scope and arrangements before ordering. Do not assume that every machine listing includes an independent inspection report.

  • 03

    How is the delivery schedule confirmed?

    Delivery timing depends on machine availability, agreed preparation, payment confirmation, loading arrangements and the shipping route. Ask HCQ for an order-specific schedule. Dispatch from China and arrival at the destination are different dates; confirm both where applicable.

  • 04

    What is your payment term?

    Our standard payment terms and conditions are as follows: 1. 30% deposit by T/T to confirm the order 2. 70% balance by T/T before shipment