Shantui SD22 crawler bulldozer - front blade
Shantui SD22 crawler bulldozer - front side
Shantui SD22 crawler bulldozer - side undercarriage
Shantui SD22 crawler bulldozer - rear ripper
Shantui SD22 crawler bulldozer - ripper linkage
Shantui SD22 crawler bulldozer - track sprocket detail
Shantui SD22 crawler bulldozer - front blade
Shantui SD22 crawler bulldozer - front side
Shantui SD22 crawler bulldozer - side undercarriage
Shantui SD22 crawler bulldozer - rear ripper
Shantui SD22 crawler bulldozer - ripper linkage
Shantui SD22 crawler bulldozer - track sprocket detail

Used Shantui SD22 Bulldozer with Blade and Ripper

This used Shantui SD22 crawler bulldozer is pictured with a front blade, enclosed cab and rear ripper assembly. Exterior views and an undercarriage close-up support a review of the attachments and running gear. The photos are not a substitute for a working test or an identification-plate check.

Listing photo reference HCQ-9650 (not a machine serial number)
Equipment shown Front blade, rear ripper assembly and enclosed cab
Condition Used; mechanical condition requires inspection
Year / hours / serial Not verified in the supplied photo set
Price / availability Request current confirmation and a quotation

Request a quote for HCQ-9650. Published model figures and their source limitations are listed in the Description.

Share :

  • Description

  • Logistics & Stock

Enquire about the used Shantui SD22 shown in this gallery using photo reference HCQ-9650. This identifies the listing, not the machine serial number. Request current availability and a quotation for the equipment pictured; year, hours and mechanical condition have not been verified from these photographs.

Shantui SD22: Equipment and Photo Details

  • SD22 markings appear on the side of the cab body; SHANTUI branding is visible on the front and rear.
  • The front views show the blade face, cutting edge and lift-cylinder arrangement.
  • Rear views show the ripper structure, hydraulic connections and visible shanks. A close-up records the track/sprocket area.

Planning the Purchase

For pushing and ripping work, ask for the blade type, cutting-edge measurements and ripper configuration in the quotation. Assess the undercarriage as a separate cost item: external track photos cannot establish remaining chain, roller or sprocket life.

Shantui SD22 Published Reference Specifications

Reference edition: Shantui SD22, current global manufacturer reference. These are published model figures, not verified measurements of the photographed used machine.

Reference item Shantui SD22, current global manufacturer reference
Rated power / speed 175 kW at 1,800 rpm
Overall weight in published configuration 23,450 kg
Published engine alternatives Cummins NT855-C280S10 / Weichai WP12G240E306
Track centre distance 2,000 mm
Published track shoe options 560 / 610 / 660 mm
Fuel tank capacity 450 L
Reference blade capacity 4.6 m³

This is Shantui’s current published SD22 configuration, not a specification for every historical SD22. The supplied photos show a blade and rear ripper, but do not confirm either listed engine. Verify the plate, blade type, ripper, track shoes and actual operating weight for this unit.

Source: Shantui global SD22 product specifications. Checked 21 October 2026.

Inspection Requests for This Shantui SD22

  • Inspect blade cutting edges, corner bits, mounting points and cylinder rods; test lift, tilt and holding functions.
  • Review ripper shanks, tips, pins and linkage, then demonstrate the fitted ripper functions.
  • Measure undercarriage wear and check steering, braking and transmission response during a safe working demonstration.

Shantui SD22 Buyer Questions

Is the photographed SD22 the current factory specification?

That has not been established. Shantui’s current SD22 reference is labelled below; older machines can have different engines, power ratings and weights. The serial plate and engine plate must identify this unit.

What evidence is needed for the ripper and undercarriage?

The photos show the rear ripper structure and an external track/sprocket view. Request shank and pin close-ups, measured undercarriage wear and a working demonstration. Confirm which ripper components are included in the quotation.

Request a Shantui SD22 Quote

Send HCQ Machinery an enquiry quoting HCQ-9650, your destination port, intended work and required attachments. Ask for the machine identification and engine plates, a clear hour-meter photo, current operating video and an itemised list of included equipment.

Agree the inspection scope, price, payment terms and delivery timing for the selected unit. Freight planning requires actual dimensions and weight in the agreed loading configuration; brochure figures and photos cannot establish destination import eligibility.

Offered for enquiry by HCQ Machinery, an independent used-equipment supplier. Brand names identify the equipment and do not imply an authorised dealership. Browse the Used Bulldozer range for other photo listings.

 
Full details

FAQ

  • 01

    What should I confirm before buying a used machine?

    Confirm the exact model and identification details, available photos or videos, included attachments and the condition information available for that machine. Good cosmetic appearance or a low displayed hour reading alone does not establish mechanical condition. Agree any further checks and the written equipment description before payment.

  • 02

    Can I request photos, videos or an inspection?

    Contact HCQ with the listing or model you are considering and ask which current photos, operating videos or inspection information are available. If you want an additional inspection, discuss its scope and arrangements before ordering. Do not assume that every machine listing includes an independent inspection report.

  • 03

    How is the delivery schedule confirmed?

    Delivery timing depends on machine availability, agreed preparation, payment confirmation, loading arrangements and the shipping route. Ask HCQ for an order-specific schedule. Dispatch from China and arrival at the destination are different dates; confirm both where applicable.

  • 04

    What is your payment term?

    Our standard payment terms and conditions are as follows: 1. 30% deposit by T/T to confirm the order 2. 70% balance by T/T before shipment