Hitachi ZX210 crawler excavator - side machine
Hitachi ZX210 crawler excavator - rear three quarter
Hitachi ZX210 crawler excavator - opposite rear side
Hitachi ZX210 crawler excavator - counterweight
Hitachi ZX210 crawler excavator - engine compartment
Hitachi ZX210 crawler excavator - hydraulic components
Hitachi ZX210 crawler excavator - cab seat controls
Hitachi ZX210 crawler excavator - cooling battery
Hitachi ZX210 crawler excavator - side machine
Hitachi ZX210 crawler excavator - rear three quarter
Hitachi ZX210 crawler excavator - opposite rear side
Hitachi ZX210 crawler excavator - counterweight
Hitachi ZX210 crawler excavator - engine compartment
Hitachi ZX210 crawler excavator - hydraulic components
Hitachi ZX210 crawler excavator - cab seat controls
Hitachi ZX210 crawler excavator - cooling battery

Used Hitachi ZX210 Crawler Excavator

This used Hitachi ZX210 crawler excavator is represented by exterior, engine-area, hydraulic-component, cab and cooling-compartment photos. ZAXIS 210 branding is visible on the body. The exact generation, regional specification and attachment package need confirmation against the machine plate and a current complete-machine view.

Listing photo reference HCQ-9666 (not a machine serial number)
Equipment shown Tracked undercarriage, enclosed cab and open service-compartment views
Condition Used; mechanical condition requires inspection
Year / hours / serial Not verified in the supplied photo set
Price / availability Request current confirmation and a quotation

Request a quote for HCQ-9666. Published model figures and their source limitations are listed in the Description.

Share :

  • Description

  • Logistics & Stock

Enquire about the used Hitachi ZX210 shown in this gallery using photo reference HCQ-9666. This identifies the listing, not the machine serial number. Request current availability and a quotation for the equipment pictured; year, hours and mechanical condition have not been verified from these photographs.

Hitachi ZX210: Equipment and Photo Details

  • The exterior photographs show the orange upper body, enclosed cab, counterweight and tracked undercarriage.
  • Open compartment views show engine components, hydraulic hoses and assemblies, plus cooling and battery areas.
  • The cab photo shows the seat, joystick controls and floor area. Neither a seat cover nor body appearance establishes operating hours or service history.

Planning the Purchase

For general excavation or loading, first settle the complete model suffix, boom and arm arrangement and required attachment. Request an unobstructed whole-machine photo and a working video: the supplied compartment details do not establish the attachment package or working range.

Hitachi ZX210 Published Reference Specifications

Reference edition: Early Hitachi ZAXIS210, manufacturer technical manual T1-1-2. These are published model figures, not verified measurements of the photographed used machine.

Reference item Early Hitachi ZAXIS210, manufacturer technical manual T1-1-2
Reference engine Isuzu AA-6BG1T
Rated output in manual 103 kW at 1,900 rpm
H/P-mode output in manual 110 kW at 2,100 rpm
Operating weight, standard ZAXIS210 column 19,600 kg
Reference arm length / PCSA-heaped bucket 2.91 m / 0.80 m³
Overall width, excluding mirrors / cab height 2,860 / 2,950 mm
Track shoe width 600 mm
Travel speed, fast / slow 5.5 / 3.6 km/h

The manual separates ZAXIS210, 210LC and 210N. The figures above use the standard ZAXIS210 column, with the stated arm, bucket and shoes. The photos do not establish the chassis suffix, serial range or generation, so these values remain a historical reference until the plate and undercarriage are checked.

Source: Hitachi early ZAXIS technical manual, public sample, page T1-1-2. Checked 21 October 2026.

Inspection Requests for This Hitachi ZX210

  • Request a full boom, arm and bucket view; the available side/rear framing does not document the entire working equipment.
  • Inspect hydraulic hoses and connections, cooling cores and engine condition, then request cold-start and warm operating demonstrations.
  • Review chain, sprocket and roller wear and test both travel directions, swing and hydraulic holding under agreed conditions.

Hitachi ZX210 Buyer Questions

Are ZX210, ZX210LC and ZX210N specifications interchangeable?

No. The reference identifies the standard early ZX210 column, not LC or N variants and not later generations. Match the complete model and serial range before using weights, dimensions or engine figures.

What do the engine and hydraulic photos prove?

They show the visible layout and exposed components at the time photographed. They do not measure oil pressure, pump output, engine power or leakage under load. Request a cold start and a controlled operating inspection.

Request a Hitachi ZX210 Quote

Send HCQ Machinery an enquiry quoting HCQ-9666, your destination port, intended work and required attachments. Ask for the machine identification and engine plates, a clear hour-meter photo, current operating video and an itemised list of included equipment.

Agree the inspection scope, price, payment terms and delivery timing for the selected unit. Freight planning requires actual dimensions and weight in the agreed loading configuration; brochure figures and photos cannot establish destination import eligibility.

Offered for enquiry by HCQ Machinery, an independent used-equipment supplier. Brand names identify the equipment and do not imply an authorised dealership. Browse the Hitachi Excavator range for other photo listings.

 
Full details

FAQ

  • 01

    What should I confirm before buying a used machine?

    Confirm the exact model and identification details, available photos or videos, included attachments and the condition information available for that machine. Good cosmetic appearance or a low displayed hour reading alone does not establish mechanical condition. Agree any further checks and the written equipment description before payment.

  • 02

    Can I request photos, videos or an inspection?

    Contact HCQ with the listing or model you are considering and ask which current photos, operating videos or inspection information are available. If you want an additional inspection, discuss its scope and arrangements before ordering. Do not assume that every machine listing includes an independent inspection report.

  • 03

    How is the delivery schedule confirmed?

    Delivery timing depends on machine availability, agreed preparation, payment confirmation, loading arrangements and the shipping route. Ask HCQ for an order-specific schedule. Dispatch from China and arrival at the destination are different dates; confirm both where applicable.

  • 04

    What is your payment term?

    Our standard payment terms and conditions are as follows: 1. 30% deposit by T/T to confirm the order 2. 70% balance by T/T before shipment